Pin-Up Girls Linda Bra #3 and Undies

By Tiffany - Friday, February 20, 2015

I finally got to making another bra. The first two bras I made weren't perfect. But, they are still so comfortable, that I don't wear any of my other bras any more. Which means that they will quickly wear out if I don't  move along with more bra production.


Pin-Up Girls Linda Partial Bra Band

I made a size 38B with alterations. I may actually be a 40A, but the pattern stops at 38A, which uses a size down underwire.


The main alterations I made with this bra were to use a narrower bridge and to take about 1/2" out of the top of the lower cup. I also added 1/2" length to the bra bands.

The fit is almost perfect. It's now a little snug, but that may be because I figured out these changes by pinning out my second Linda bra. I've worn that bra quite a bit and the fabric may now be relaxing out a bit. I'm going to wear my new bra a bit to see if the fit improves after a few wears. If not, I may have to add back some depth on the lower cup.

I re-read the Bra Makers Manual and finally noticed the importance it placed on finding the right size bridge before you sew. It suggests to cut little templates and try it them. My previous bras had bridges that are too wide, which means that the bridge gapes and doesn't lay flat against my chest.

If you are about to sew a bra, I would suggest:
  1. Find the right underwire size by placing test ones (or make a template out of cardboard)
  2. Find the right bridge size by making little templates out of thin cardboard
  3. Measure your breast or a bra that fits to find the right lower cup depth
Just those three steps will probably save lots of time in fitting.

For Christmas, I got a few fabric sets from Bra Makers Supplies to make more bras (yay!). This one is the Black Cherry with Rose/Black Lace. A black findings kit had to be purchased separately.

wrong side
The black findings worked really well with the red-ish 'black cherry' fabric. The band fabric was a double knit instead of the power net I used with the earlier bras. It is much thicker, so I did have some trouble sewing near some of the seams. I think I prefer the power net.

The lace placement was probably the hardest thing! I spent about an hour trying to figure it out. Overall, I'm really happy with my placement. And, although I usually don't use the little bows, the bra looked like it wanted it. The bra is almost too pretty!

Once again, I'm really impressed with the pattern and resulting bra.

But wait! There's more! I had leftover fabric and lace, as well as some extra picot elastic that I had bought, so I decided to make matching panties.

The pattern is the Free Lacey Thong by Fehr Trade.

wrong side
The pattern was super simple and it was a quick sew. I had some scrap jersey left over to use for the crotch lining.

I made a size large, since that is the size that is supposed to fit someone who fits a Burda size 40 (which I do). The fit is perfect and I can't believe how comfortable they are. I'm not sure how often I'll wear them, but they will come in handy when I'm wearing a dress or skirt that I don't want weird underwear lines with.

Who new making underwear and lingerie could be so fun and easy?!

  • Share:

You Might Also Like


  1. Wow! Those are beautiful and look really high-end!

  2. This is such a beautiful lingerie set!
    I'm still working on the fit of my first BMS bra, the Classic Bra.
    Thanks for the tips!

    1. Thank Dale! I'm glad my notes are helping someone. :)

  3. Very beautiful work, Tiffany. This thong is definitely is too good looking for the wardrobe and in addition not only handy for skirts an dresses - normal pants benefit, too. (hm ;) Do some comparison and you`ll be surprised - and go for some more :)

  4. This comment has been removed by the author.